Description

JK White Cement CEM II is designated under British standards as BS EN 197-1:2011 CEM II 42.5 N and International standards. Our new product is durable, smoother and economical in usage. Especially suited for architectural uses and providing attractive and durable concrete, rendering and mortar usage and cast stone, architectural Insitu concrete, paving stone, street furniture and terrazzo.

JK White Cement is a premium white Portland cement produced with unique raw material and state-of-the-art technology, with an enduring and consistent white color. It gives triple benefits of high durability, higher gloss effect and smoother wall finish with greater economic value. It can be used for interior and exterior applications. Its efficacy extends to being used as a primer coat for cement paint, as well as filler for all minor hair cracks and crevices to provide a smooth matte finish. As compared to ordinary lime wash, JK White Cement gives longer life to paint and superior finish to the surface.

KEY ATTRIBUTES

• Low heat of hydration
• Great fineness & durability
• It is produced from the raw material with highest purity
• High early strength compared to Grey Cement CEM II 42.5

BENEFITS

• Due to low heat of hydration, probability of development of cracks is minimised
• It allows the preparation of perfect mixtures with the colour pigments
• With its high fineness, perfect surfaces are obtained when appropriate moulds are used
• It gives high final compressive strength as compared to CEM II 42.5 grey cement
• Allows making of larger elements without development of cracks
• It is economical

Application Process

• The surface to be painted should be free from oil, grease, dust, dirt particles, efflorescence and even loose chalky material. It should be cleaned by scraping, scrubbing or wire brushing
• If the surface is too smooth then an undercoat of special cement primer should be applied
• After cleaning, the surface should be thoroughly soaked with clean water for 5 to 10 seconds and the action should be repeated 3 to 4 times depending on the absorption of the surface. The moisture must be properly absorbed. The surface should be considered ready for cement wash only when the sprayed water starts evaporating from it or running down
• Slowly add 2 parts of JK White Cement WhiteMaxX to 1 part of clean, potable water. Stir continuously and mix thoroughly to obtain a creamy consistency
• Wait for 5 to 10 minutes, then dilute the mix further by adding an additional 1 part (or more) of water, until the mix is of brushable consistency
• If the surface is old or of lime, add 10% to 15% of white glue adhesive (by weight) in water and apply as an undercoat
• Apply one coat on the prepared and pre-wetted wall by brush or spray
• After 6 to 8 hours of drying, spray the surface with water
• After overnight drying, apply a second coat. Normally two to three coats are sufficient for a good finish

Uses Of  White Cement

• Decorative Cement Paint
• White Cement Wash
• Dry Mix Plasters and Mortars
• Sand Faced Spray Plaster
• Exposed Grit Washed Plaster
• Texture Plaster
• Plain Plaster
• Pointing on Bricks / Stone Work
• Precast Panels
• Insitu Terrazzo Flooring
• Making Coloured Tile Adhesive
• Manufacturing of Mosaic Tiles
• Casting of Pavement Blocks Heavy Duty Tiles
• For Fixing and Laying Marble Stones

ONARMENTAL DECORATIVE APPLICATIONS

• Architectural Concrete Components Made of Glass fiber Reinforced Concrete (GRC) &Synthetic fiber Reinforced Concrete (SRC)
• Ornamental Objects Like Garden Furniture, Flower Pots, Grills, Lamp Post etc.